|
|
 |
||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
 |
Ecological Paintwith Cool Touch*
|
|||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|
Benefits
|
Virtually No Odor |
0 VOC |
|
|
Hideriffic Technology |
|
Splatter Resistant |
Hypo-Allergenic |
|
Water Cleanup |
Brush, Roll or Spray |
|
Kid Friendly |
Netonian Rheology |
|
Energy Saving |
Virtually No Sag |
| Longer Service Life |
|
|
No Known Carcinogens or Neuro_toxins |
|
|
Performance
|
Not only is Ecological Paint with Cool Touch* friendly to th eenvironment, adults and children, but it also performs well during and after application. It has exceptional flow and leveling qualities. Containing no solvents, the water-based material can dry in hours. Its Cool touch * formulation provides extraordinary durability and energy efficiency.
|
Surface
Preparation
|
Prior to the start of any painting project, surface must be sound, clean, dry, and free from all dirt, oil, chalk, or other contaminants. Hairline cracks should be filled with caulking compound level with the sur face.
|
Application
|
Ecological Paint with Cool Touch* can be applied with a brush, roller or sprayed. Its unique Netonian rheology allows a splatter free application with virtually no lap marks. To obtain best results, do not thin. Airless spray tips recommended size is .08 (depending on fan size) with a fluid pressure of 1500-3000 psi. Two coats are recommended over most surfaces.
|
Colors
|
Both standard and custom colors are available and free from glycol, surfactants and volatile organic compounds and neurotoxins. Our state of the art technology allows us to match nearly any color sample.
|
Product
Description
|
Ecological Paint with Cool Touch is one of the first water based acrylic urethanes, which has been formulated especially for chemically sensitive people and professional roofers. It creates a durable and flexible surface. It is virtually odor free. This product does not contain any known hazardous, toxic, or carcinogenic materials. Its unique Cool Touch* formulation decreases heat absorbtion on the surface material by increasing its reflectivity within the IR spectrum. This lessens the contraciton and expansion of the material, decreasing the chemical atmospheric degradation. The result is an energy conserving, extremely durable, longer lasting exterior coat.
|
Technical
Data |
|
| Vehicle Type |
Water
Based Acrylic Urethane
|
| Pigment Type |
Variable
|
| Weight Solids |
53%
±3%
|
| Average Coverage |
200-400 Sq
Ft
|
| Dries By |
Water
Evaporation
|
| Viscosity |
90-100KU
|
| Flash Point(Seta) |
None
|
| Clean Up With |
Water
|
| Weight Per Gallon |
13.0 #
± .1
|
| VolatileOrganic Compounds (VOC) |
0
|
| Surface Temperature at Application |
Min-
40°F (5°C) |
| Dry Time* |
Dry
To Touch 30 min.
To Recoat 1Hr To Hard Dry 7 Day |
| Gloss Spectral Data(60°) |
0-2
|
| Storage Temperature |
Min-
35°F (2°C)
Max- 95°F (35°C) |
| HEALTH HAZARD | 1 - Slight |
| FLAMMABILTY HAZARD | 0 - Minimal |
| REACTIVE HAZARD | 0 - Minimal |
| PERSONAL PROTECTION | E
- Glases, Gloves, Dust Respirator |
Information contained in this technical literature is believed to be accurate and is offered in good faith for the benefit of the consumer. The Company, however, cannot assume any liability or risk involved with the use of the product since the conditions of use are beyond The Control Of The Company.Click Here to load or print the PDF version of this page. (402Kb)
|
Ecological
Paint™ Mailing
Address: Ecological Paint 1810 S. 6th Avenue. Tucson, AZ 85713 |