|
|
 |
||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
 |
Direct-to-MetalSatin Paint
|
|||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|
Benefits |
Virtually No Odor |
0 VOC / No Fire Hazard |
|
|
Hideriffic Technology |
|
Splatter Free |
Hypo-Allergenic |
|
Water Cleanup |
No Dot Regs |
|
Kid Friendly |
Netonian Rheology |
|
Exceptional Flow |
Virtually No Sag |
| No Known Carcinogens or Neuro-toxins |
|
|
Performance
|
Ecological Paint DTM Satin paint is friendly to environments , adults, and children, but it also performs well during and after application. Its Netonian rheology allows exceptional flow and leveling qualities with virtually no sag and is splatter free. It is usually one coat and fast drying (can vary with color and atmospheric conditions). When Ecological Paint DTM Satin paint is fully cured, it has enviable performance with "hideriffic" technology, durability, strong adhesion, excellent weather-ability, and exceptional scrub resistance. Ecological Paint DTM Satin paint is an excellent choice for most vertical metal surfaces ( ferrous and non-ferrous). It is ideal for commercial, residential, and institutional applications.
|
Surface
Preparation
|
Prior to the start of any painting project, surface must be sound, clean, dry, and free from all dirt, oil, chalk, dust, rust, stains, grease, flaking paint or other foreign materials that could effect positive adhesion.
|
Application
|
Ecological Paint DTM Satin paint is applied with brush, roller, or sprayer (conventional, airless, HLVP). Our Netonian rheology allows a splatter free application with virtually no lap marks. for best results, do not thin or paint when rain or dew is forecast . Test patch is recommended for questionable surfaces.
|
Colors
|
Both standard and custom colors are available and free from glycol, surfactants and volatile organic compounds and neurotoxins. Our state of the art technology allows us to match nearly any color sample.
|
Product
Description
|
Ecological Paint DTM Satin paint is leading the industry as the first proven multi-shell polymer containing zero VOC. Our DTM is formulated without lead or mercury. It is uniquely formulated as a labor saving product to perform as both a primer and finish coat. This tough flexible film is fast drying and contains no known hazardous, toxic, or carcinogenic materials. This ecologically friendly film creates the adhesion needed to coat most properly prepared ferrous and non-ferrous surfaces. Ecological Paint DTM Satin paint offers excellent color and gloss retention with virtually no odor and our "Hideriffic" technology. Brush, roll, or spray, this DTM Satin paint dries rapidly and cleans up with water and is useful on most metal surfaces.
|
Technical
Data |
|
| Vehicle Type |
Water
Based Acrylic Urethane
|
| Pigment Type |
Variable
|
| Weight Solids |
56%
±3%
|
| Average Coverage |
200-400 Sq
Ft
|
| Dries By |
Water
Evaporation
|
| Viscosity |
80-90 KU
|
| Flash Point(Seta) |
None
|
| Clean Up With |
Water
|
| Weight Per Gallon |
11.77 #
± .1
|
| VolatileOrganic Compounds (VOC) |
0
|
| Surface Temperature at Application |
Min-
40°F (5°C) |
| Dry Time* |
Dry
To Touch 1min.
To Recoat 2 Hr To Hard Dry 24 Hrs |
| Gloss Spectral Data(60°) |
8-15
|
| Storage Temperature |
Min-
35°F (2°C)
Max- 95°F (35°C) |
| HEALTH HAZARD | 1 - Slight |
| FLAMMABILTY HAZARD | 0 - Minimal |
| REACTIVE HAZARD | 0 - Minimal |
| PERSONAL PROTECTION | E
- Glases, Gloves, Dust Respirator |
Information contained in this technical literature is believed to be accurate and is offered in good faith for the benefit of the consumer.The Company, however, cannot assume any liability or risk involved with the use of the product since the conditions of use are beyond The Control Of The Company.Click Here to load or print the PDF version of this page. (402Kb)
|
Ecological
Paint™ Mailing
Address: Ecological Paint 1810 S. 6th Avenue. Tucson, AZ 85713 |